Years Experience
Maximize Filtration Efficiency With Duplex Filters
GTS Filters And Systems Pvt. Ltd. is one of the leading Duplex filter manufacturers in India. Our offered Duplex filter is manufactured using premium quality material. The main quality of the duplex filter is it can work maintenance-free except for examining the seals and cleaning of the filter part. This has two filter chambers with a valve attached to divert the flow of liquid to one strainer while the other is being cleaned.
Duplex strainers are mainly used where the interference to the operation or flow is not acceptable. This duplex strainer allows the machine to operate without any pause when cleaning or servicing is required by redirecting the flow to the other strainer when the first strainer reaches its capacity and is being cleaned. All fluid from the inlet will flow in the first strainer basket.
+91 9328433915
Get a Free Appoinment Booking!
Features & Advantages
- Dual filtration chambers
- Simultaneous filtration and cleaning
- Automatic switching between chambers
- Low-pressure drop
- High dirt-holding capacity
- Corrosion-resistant construction
- Quick and easy maintenance
- Wide range of filtration ratings
- Compatible with various fluids
- Compact design for space-saving installation
- Industrial hydraulic systems
- Lubrication systems
- Cooling water circuits
- Marine engine systems
- Oil and gas processing plants
- Chemical processing plants
- Pulp and paper manufacturing
- Power generation plants
- Food and beverage processing
- Municipal water treatment facilities
The Most Reliable Duplex Filter Manufacturers and Suppliers
As the fluid passes through the first strainer, the filter part will trap all the impurities. This means that only clean fluid will exist in the strainer basket to the outlet port. With time the pressure drop will increase in this filter chamber. This increased pressure drop is an indication that particles have been accumulated and cleaning is needed.
The operator pushes the valve lever to the opposite end and it will close the clogged filter chamber and open the clean filter chamber that was not in use. Instead of stopping the entire system, one can simultaneously use the other filter part. For cleaning the dirty filter chamber is depressurized by the vent screw, the housing cover is detached and the filter element has to be removed. The filter part is cleaned by flushing it with a cleaning fluid and later blown out using compressed air. Our Duplex filter in MS/CS MOC is available with Painted, hot-dip galvanized and powder coated. Duple filter in SS MOC is available with mirror polished both sides and glass bead blasting.
- Refineries and Petrochemicals
- Power Plants
- Oil & Gas
- Water filtration and Cooling Towers
- Chemical Industries
- Automobile Industries
- Steel Industries, Metals & Minerals
- Textile Industries
- Dairy and Food Industries
- Dyes, Inks and paints Industries
- Cement Industries
- Fertilizers Industries
- Pharmaceuticals
- Coolant Oils and Cutting Fluids
Line Size | ¼” NB to 30” NB |
End Connections | 150# & 300# Flagged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld, NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn. |
Material of Construction | CS, MS, SS304, SS304L, SS316, SS316L, SS317L |
Operating Pressure | 0 to 50 Bar |
Operating Temperature | 15℃ to 500℃ |
Flow Rate | Up to 1000 M3/Hr. & More |
Filtration Rating | 1 Micron to 6000 Micron & More Top cover with nut & bolts type or quick opening type |
Featured Products
The company has gained a prominent position in the national and foreign markets by delivering high-end products.