Compressed Air Filter

  • Home
  • Compressed Air Filter
25

Years Experience

Premium Compressed Air Filter to Remove Contaminants from Air

Compressed Air Filters are used in compressed air lines to keep solid and liquid impurities from entering the system. Compressed air getting out of a Screw or Piston Compressor is high in water, oil, and other impurities. These pollutants must be removed using a Compressed Air Filter. GTS Filters and Systems is one of the leading compressed air filter manufacturers in India. We have precisely designed these filters with the highest quality materials. Our filters are compliant with all environmental conditions. The offered filter can remove contaminants such as dust, water, rust, condensation, moisture content, exhaust fumes, and oil impurities from the air.

Unfiltered compressed air enters the filtration systems under positive pressure and flows through specified filter media to remove dirt, dust, moisture, and oil contaminants. It is highly important to remove these particles. Otherwise, the system components, such as valves and cylinders, will not function well in the long run.

+91 9328433915

Get a Free Appoinment Booking!

    Technical Data

    Advantages & Applications

    Advantages Of Compressed Air Filter

    • Easy to clean
    • Low Pressure drop
    • Large area
    • Easy to operate and maintenance
    • Positive Sealing to prevent bypass
    • Customized design
    • High dirt load holding capacity
    Applications Of Compressed Air Filter

    • Refineries and Petrochemicals
    • Power Plants
    • Oil & Gas
    • Water filtration and Cooling Towers
    • Chemical Industries
    • Automobile Industries
    • Steel Industries, Metals & Minerals
    • Textile Industries
    Available in Different Sizes

    Choose the Best Compressed Air Filter from Leading Suppliers

    Filtration is required because compressed air frequently contains dust, filth, corrosion, moisture, and other potentially dangerous substances. Poorly treated compressed air can taint control valves, causing seals to bulge and fail. We, the trusted compressed air filter suppliers in India have designed compressed air filters with specified compressed air parameters such as flow rate (quantity), line thickness, operating pressure, operating temperature, and filtration efficiency (purity). Air enters these compressed air filters from one side and passes through the filter element, which collects any dust, water, or oil. The clean air then exits the filter housing on the other side. Our produced compressed air filters come with housings made of aluminum, CS, and stainless steel. We provide air filters made from a variety of filter materials. These are paper, synthetic, polyester, pp, coalescing, borosilicate glass fiber, activated carbon, HDPE, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh, and sintered powder. If you are interested in buying the offered filter then you may contact us. Or else visit our website for further details about our range of filters!
    Compressed-Air-Filter-3
    Compressed-Air-Filter-2
    Compressed air filters classified under below categories
    • MS – Moisture Separator:For the removal of 99% of bulk oil/water removal from the compressed air.
    • SB – Pre Filtration: Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 microns. This filter elements available in 5, 10, 25 and above microns.
    • PF – High Efficiency Fine Filter: For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.UF – High Efficiency Oil Removal Filtration for the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]
    • AC – Activated Carbon Filtration:For the removal of vapor and hydro carbon odors giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

    Technical Parameters Of Compressed Air Filter

    Line Size ¼” NB to 30” NB
    End Connections 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld, NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
    Material of Construction CS, MS, SS304, SS304L, SS316, SS316L, SS317L
    Operating Pressure 0 to 50 Bar
    Operating Temperature 15℃ to 500℃
    Flow Rate Up to 80,000 NM3/Hr. & More
    Filtration Rating 0.01 Micron to 6000 Micron & More Top cover with nut & bolts type or quick opening type