The Many Categories Of A Compressed Air Filter!

The Compressed air filter is also known as a line filter. It has its uses in filtering out airborne particles, water vapour, microorganisms, and chemical gases that infiltrate the compressors throughout the manufacturing process. After compression has taken place, the pollutants become more concentrated and potentially more harmful to human health.

It is critical for all contemporary manufacturing facilities to have clean and dry compressed air because it helps to safeguard the compressed air system, decreases maintenance costs, and improves final product quality, among other benefits. Therefore, it becomes highly prudent to install a Compressed air filter. 

What Occurs When There Is no Compressed air filter?

When it comes to the constant battle against troubles caused by contaminants entering the air system, the dependability of compressed air filtration is critical. Contamination in the form of dirt, oil, and water may result in the following consequences: 

  • Pipe scaling and corrosion in pressure vessels are two examples of this.
  • Production equipment, air motors, air tools, valves, and cylinders are all at risk of being damaged.
  • Desiccant replacement for adsorption dryers that occurs too soon or unexpectedly
  • The spoiled product

The Different Categories Of Compressed Air Filter

Exceptional performance without any compromises gets ensured by the use of innovative features. Our filters have a differential pressure that begins low and continues low. In this way, one gets a solution for applications that need high-performance filtering without the typical high energy expenditures associated with conventional filters. 

The classification of compressed air filters as per the leading Compressed Air Filter Suppliers In India – 

Moisturiser Separator (MS) – 

It removes or more likely separates up to 99 percent of bulk oil and water from compressed air. 

Pre Filteration With SB Elements – 

This particular system consists of sintered bronze filter components that remove pipe scales, bulk liquid, solid particles, and dust down to 5 microns in size. This filter element is available in micron sizes ranging from- 5, 10, 25, and higher.

The PF Type Filteration – 

At 21 degrees Celsius, it removes particles as small as 1 micrometre, including coalescing liquid water and oil and dust, leaving a maximum residual oil aerosol concentration of 0.5 mg/m3 at the same temperature.

Filtration type UF

This is a filtration system for oil removal. It gets employed for removing particles below or up to 0.01 micron, including oil aerosols and dust. At 21 degrees Celsius, the efficiency is 99.99 percent, and the highest residual oil aerosol concentration is 0.01 mg/m3. 

AC Type Filteration – 

The activated carbon filtration removes vapour and hydrocarbon smells, leaving a maximum residual oil content of (excluding methane) at 21 degrees Celsius after the removal of vapour and hydrocarbon odours.

GTS Filters & Systems (India) Pvt Ltd are the leading Compressed Air Filter Manufacturers In India. We manufacture high-quality Pleated Filter Cartridge that can withstand any situation. For more information about us, visit our website and contact us. 

Previous Post
Newer Post

Leave A Comment